Motor Oil & Filter Life Extender
Motor Oil Centrifuge can cut filter and oil change expense to a fraction of the cost and…
Today’s engines have what is called a full-flow oil filter. These filters generally filter to 25 microns….two things that you did not know is, a 25 micron filter is only 80% effective. Meaning 20% of particle larger than 25 microns are NOT held in the filter and go out to wear out your engine and the other point is the average oil film thickness between components in your engine is between 5 and 20 microns.
According to the SAE, particles as small as four microns can cause up to 77% of engine wear.
Engine oil pressure spins the rotor at a rate up to 6,000 rpm’s. That force separates the solid contaminates from the main oil supply while spinning the solids to the inside walls of the rotor, which is easily cleaned.
Contaminant particles as low as 1/10th of 1 micron are removed, eliminating the wear and tear on close tolerance metal parts by at least 50%.
The Dieselcraft OC-25 Centrifuge removes dirt and wear particles from the oil flow all together. Filters take out solids and hold them from circulating further but plug, reduce oil flow and eventually reach the point of restriction.
The cleaning efficiency remains constant in a Dieselcraft OC-25 Centrifuge where in any filter efficiency starts to drop off the minute you install it.
The Dieselcraft OC-25 Centrifuge is a compact bypass type system. This system measures less than 5 inches in diameter and less than 10 inches tall. And unlike other centrifuges it requires only a ¼ NPT taped hole to return the oil to the engine through a 3/8 ID hose.
In engine applications oil change intervals using conventional oil can be extended to double if not three times. And with synthetic oils oil changes can be extended over 40,000 miles.
Because of its lower flow rate of 1 GPM and physical size the OC-25 can be used on a wide variety of gasoline or diesel engines.
The kit includes all needed hoses and fittings for most installations.
List Price $599